7 inch fetal monitor
Technical Parameters:
Fetal Heart Rate:
- Transducer: Multi- crystal, pulsed doppler high sensitive
- Strengh :<5mW/ cm2
- Working frequency: 1.0 MHz
- Signal processing: special DSP system and modern recognization
- Measurement range: 50~240BPM
- Alarm range:
High: 160,170,180,190 bmp
Low: 90,100,110,120bmp
The largest audio output power:1.5W
TOCO:
Measurement range: 0~100 units
Display: The LCD display events, date, time, volume, TOCO Ref, alarm state, FHR, TOCO and so on it can play back.
Storage: 12 hours (including the maternal parameters data storage
Battery working time: 8.4 V Li-ion
Battery working time: 2 hours (no printer working)
Speaker: 1W
Power supply: AC 220± _ 20%, or 8.4V Li- battery
Power consumption: < 20W
Working Environment: Temperature: 5~40°C,
Atmospheric Pressure: 86K pa~ 106KPA
Humidity: < 93%
Transducer Acoustic Output: Under the requirements laid down in IEC 1157, 1992, the peak negative ascoustic pressure does not exceed 1Mpa. The output beam intensity does not exceed 20mW/ cm2m and the spatial-peak temporal- average intensity does not exceed 10mW/cm2.
GEL: Viscous aqueous non- sensitizing, hypo- allergenic and non- irritating to skin. Indefinite shelf life, bacteriostatic (not sterile)
Features:
- 7" TFT color screen, folding 90 degrees, Meet the needs of different perspectives
- Advanced digital signal processing technology (DSP), the parameter display result is more accurate and reliable
- Multi- crystals, wide beam form, high sensitivity ultrasound transducer, strong anti- interference capability, low ultrasound power, safer to the fetal
- With a variety of professional display interface, using the shuttle knob function key convenient and quick operation
- A variety of alarm functions, including fetal speed, low power, slow alarm, printer short of paper alarm, etc
- Low power design, to ensure long- term, continuous monitoring of pregnant women, fetal stability
- Wide power supply design, applicable to a wide range of areas; AC and DC dual use, to ensure the instrument to environment of high adaptability
- 112MM imported hot array printer, ;long service life, it can print FHR, TOCO curve, parameter value, monitor status and so on
- Automatic fetal movement counting, clear and intuitive display of monitoring curve and data
- Continuous monitoring of curves and more than 12 hours data storage, then can be played and reprinted
- The system can provide reference for clinical diagnosis with the function of fetal scoring
- Support wired, wireless network connection, the central monitoring system can be dynamic, timely, comprehensive observation of the monitoring situation
- The life exceeds over 20 years
- A standard patient event marker and a clinical event marketing button to separately mark clinical events
Technical Parameters:
Fetal Heart Rate:
- Transducer: Multi- crystal, pulsed doppler high sensitive
- Strengh :<5mW/ cm2
- Working frequency: 1.0 MHz
- Signal processing: special DSP system and modern recognization
- Measurement range: 50~240BPM
- Alarm range:
High: 160,170,180,190 bmp
Low: 90,100,110,120bmp
The largest audio output power:1.5W
TOCO:
Measurement range: 0~100 units
Display: The LCD display events, date, time, volume, TOCO Ref, alarm state, FHR, TOCO and so on it can play back.
Storage: 12 hours (including the maternal parameters data storage
Battery working time: 8.4 V Li-ion
Battery working time: 2 hours (no printer working)
Speaker: 1W
Power supply: AC 220± _ 20%, or 8.4V Li- battery
Power consumption: < 20W
Working Environment: Temperature: 5~40°C,
Atmospheric Pressure: 86K pa~ 106KPA
Humidity: < 93%
Transducer Acoustic Output: Under the requirements laid down in IEC 1157, 1992, the peak negative ascoustic pressure does not exceed 1Mpa. The output beam intensity does not exceed 20mW/ cm2m and the spatial-peak temporal- average intensity does not exceed 10mW/cm2.
GEL: Viscous aqueous non- sensitizing, hypo- allergenic and non- irritating to skin. Indefinite shelf life, bacteriostatic (not sterile)
Features:
- 7" TFT color screen, folding 90 degrees, Meet the needs of different perspectives
- Advanced digital signal processing technology (DSP), the parameter display result is more accurate and reliable
- Multi- crystals, wide beam form, high sensitivity ultrasound transducer, strong anti- interference capability, low ultrasound power, safer to the fetal
- With a variety of professional display interface, using the shuttle knob function key convenient and quick operation
- A variety of alarm functions, including fetal speed, low power, slow alarm, printer short of paper alarm, etc
- Low power design, to ensure long- term, continuous monitoring of pregnant women, fetal stability
- Wide power supply design, applicable to a wide range of areas; AC and DC dual use, to ensure the instrument to environment of high adaptability
- 112MM imported hot array printer, ;long service life, it can print FHR, TOCO curve, parameter value, monitor status and so on
- Automatic fetal movement counting, clear and intuitive display of monitoring curve and data
- Continuous monitoring of curves and more than 12 hours data storage, then can be played and reprinted
- The system can provide reference for clinical diagnosis with the function of fetal scoring
- Support wired, wireless network connection, the central monitoring system can be dynamic, timely, comprehensive observation of the monitoring situation
- The life exceeds over 20 years
- A standard patient event marker and a clinical event marketing button to separately mark clinical events
Add a Review
You Might Also Like
Add Related products to weekly line up
In The Same Category
41 other products in the same category:
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
