9801404075 nsbmet@gmail.com

CT Scan Dual Syringe Injection System

  • Rs


Technical specification Description 
Electrical requirement 220VAC/ 110VAC, 50 or 60Hz, 200VA
Operation Interface     Available in English, French, Spanish, German and Chinses    
Flow Rate 0.1-10 m/sec. in increments of 0.1 m/sec
Syringe Capacity  115ml for Zenith- C11; 200ml for Zenith-C22
Volume 0.1 ml to syringe capacity in 0.1 ml increments 
Pressure 

Preset limit:300 psi default, user settable from 50to 350 psi increments 

Display: Real- time pressure curve 

Change threshold: Stop injection if pressure changing suddenly 

Alarm: Voice alarm and stop injection when over preset limit 

Injection or scan Delay 0 to 3559 seconds in 1 sec. increments 
AutofillSettable flow rate from 3- 8ml/sec., volume from 10ml to syringe capability 
Injection Capabilities Programmable up to 8 phases 
Pause Phase 0~ 999 sec. in 1 sec. increments 
Hold Capability 30 minutes max 
Storage Capability 1000 protocols 
Expel air locked Unable to inject unless expelling air 
Test injection Settable flow rate from 0.1- 5ml/sec., volume from 0.1ml to 10ml 
Heat maintainer 35~38°C (optional)
Hand switch Hand switch control pause and continue injection (Optional) 
Emergency stop function When the system is injecting, click on any point of the touch screen or any button on the injector arm, the system will stop injection 
Dual Flow Settable in a ratio of saline and contrast 
KVOIndependent KVO Program 
Dimension 

Injector Arm and Pedestal: L: 22.87* (58.0cm), W: 12.5 (20.1cm), H: 50.2* (127.4cm)

Console: L: 4.55* (11.55 cm). W: 12.68* (31.8cm), H: 9.77* (24.81cm )

Weight 

Injector Arm and pedestal: 19.5 kg

Console: 4.1 kg 

Real- time injection pressure monitoring 

With the highly sensitive pressure transducers, it can display the pressure waveforms of injections, control the pressure in the pre- set ranges, monitor the pressure derivative values, control the injecting procedure and effectively reduce the leakage and save the contrast medium. 

Saline Flush and Dilution  

Saline flush can from much more denser contrast media bolus. It will boost the accuracy of contrast injecting time, reduce the waste of contrast substance and diminish the imaging artifacts in the torso scan. 

In the coronary imaging, diluting saline injection can make the ventricles and coronary arteries have the consistent contract densities. Which can boost the image clarity with minimal artifacts. 


Dual Flow with Setting Motion Ratios 

Zenith dual CT injector system option is more than a saline flush after a contrast bolus Operator can inject both contract and saline at the same time with setting motion ratios. With the proper ratio, left and right hear ventricles can be illuminated uniformly or improved image quality. 


Flexible 8 phases injection setting protocols 

Clear and simple console operation, flexible & customized protocol setting interface Users can easily set one phase injection or complex 8 phases injection as well to meet the needs of all clinic application. 

Share

Technical specification Description 
Electrical requirement 220VAC/ 110VAC, 50 or 60Hz, 200VA
Operation Interface     Available in English, French, Spanish, German and Chinses    
Flow Rate 0.1-10 m/sec. in increments of 0.1 m/sec
Syringe Capacity  115ml for Zenith- C11; 200ml for Zenith-C22
Volume 0.1 ml to syringe capacity in 0.1 ml increments 
Pressure 

Preset limit:300 psi default, user settable from 50to 350 psi increments 

Display: Real- time pressure curve 

Change threshold: Stop injection if pressure changing suddenly 

Alarm: Voice alarm and stop injection when over preset limit 

Injection or scan Delay 0 to 3559 seconds in 1 sec. increments 
AutofillSettable flow rate from 3- 8ml/sec., volume from 10ml to syringe capability 
Injection Capabilities Programmable up to 8 phases 
Pause Phase 0~ 999 sec. in 1 sec. increments 
Hold Capability 30 minutes max 
Storage Capability 1000 protocols 
Expel air locked Unable to inject unless expelling air 
Test injection Settable flow rate from 0.1- 5ml/sec., volume from 0.1ml to 10ml 
Heat maintainer 35~38°C (optional)
Hand switch Hand switch control pause and continue injection (Optional) 
Emergency stop function When the system is injecting, click on any point of the touch screen or any button on the injector arm, the system will stop injection 
Dual Flow Settable in a ratio of saline and contrast 
KVOIndependent KVO Program 
Dimension 

Injector Arm and Pedestal: L: 22.87* (58.0cm), W: 12.5 (20.1cm), H: 50.2* (127.4cm)

Console: L: 4.55* (11.55 cm). W: 12.68* (31.8cm), H: 9.77* (24.81cm )

Weight 

Injector Arm and pedestal: 19.5 kg

Console: 4.1 kg 

Real- time injection pressure monitoring 

With the highly sensitive pressure transducers, it can display the pressure waveforms of injections, control the pressure in the pre- set ranges, monitor the pressure derivative values, control the injecting procedure and effectively reduce the leakage and save the contrast medium. 

Saline Flush and Dilution  

Saline flush can from much more denser contrast media bolus. It will boost the accuracy of contrast injecting time, reduce the waste of contrast substance and diminish the imaging artifacts in the torso scan. 

In the coronary imaging, diluting saline injection can make the ventricles and coronary arteries have the consistent contract densities. Which can boost the image clarity with minimal artifacts. 


Dual Flow with Setting Motion Ratios 

Zenith dual CT injector system option is more than a saline flush after a contrast bolus Operator can inject both contract and saline at the same time with setting motion ratios. With the proper ratio, left and right hear ventricles can be illuminated uniformly or improved image quality. 


Flexible 8 phases injection setting protocols 

Clear and simple console operation, flexible & customized protocol setting interface Users can easily set one phase injection or complex 8 phases injection as well to meet the needs of all clinic application. 

Add a Review

Your rating: