- Home
- About Us
-
Shop
-
Primary Care
- Stethoscope
- Sphygmomanometer
- Blood Pressure Monitor
- Blood Glucose Meter
- Height and Weight
- Pulse Oximeter
- Spirometers
- Examination Table
- X- Ray Film Viewers
- Human Anatomical Models
- DVT pump
- Defibrillator
- General Practice
- Pediatrics
- Emergency medicine
- General Practice
- Electronic Ventilator
- Emergency medicine, Resuscitation
- ICU (Intensive Care Unit)
- Secondary Care
- Accessories
- Ultra sound
- Medical Technical Facilities
- Furniture, Logistics
-
ECG
- Laboratory
- Medical Consumables
- Orthopedic surgery
- Medical Imaging
- Surgery unit
- Wellness
- Gastroenterology
- Cardiology
- Neurology
- Automatic Medical Gas Supply unit
-
Home Use
- EEG
-
Primary Care
- Contact Us
- FAQ's
Defibrillator DM7000
- Home
- Defibrillator DM7000
Defibrillator DM7000
- Rs
Display
Screen Type: High- resolution display
Screen Size: 7 inches (17.7cm ) diagonally
Sweep Speed: 25mm\sec
Information: Heart Rare, Lead\Pads, Alarm On/Off, spO2, AED Function and Prompts, Alarm Selection and Limits, Delivered Energy
Defibrillator
Waveform : Biphasic
Energy Display: Monitor display indicates both selected and delivered energy
Charge Prompt Type: Voice and Visual prompts
Electrode Impedance Measurement Range: 0-250 ohms
ECG Monitoring
Patient Connection: 3- lead ECG cable, or 5-lead ECG cable, paddles
Lead Selection: Displayed on monitor, paddles, I,II,III, AVR, AVL,AVF, V
ECG Size: 0.25,0.5,1,1.5,2,4 cm/mV display on monitor.
Heart Rate: 20-300BPM
Heart Rate Alarm: Om\Off displayed on monitor, user-selectable
Smart Alarms: Beeper/voice prompts indicate shockable rhythm
Battery
Type: Rechargeable, Ni-MH battery, 12V
Operating Time: For a new, fully charged battery60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions.
SpO2 Module
Measurement Range: 30~100%, ±2% between 80%~90%, other ±5%
Alarm Range: User set high limit and low limit
Alarm Accuracy: ±10% within setting values
Alarm time Accuracy: less than 12 sec
Recorder
Paper: 50mm thermal
Speed: 12.5mm/sec, 25mm/sec. User-Selectable 6-Second delay
Printing Method: High-resolution, thermal array print head
Print- out Modes: Manual or automatic, User-configurable
On/Off Control: Front panel and paddle
Automatic Function: 9-second recording initiated by alarm activation or defibrillator charge or defibrillator discharge
AED Mode
AED Function: Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts
Shockable Rhythms: Ventricular fibrillation
Ventricular tachycardia
QRS complex wave duration
Charge Control: Control on device front panel, press key on paddle
Manual Mode
Energy Selection: Selectable at 2,5,7,10,20,30,50,70,100,150,200,300,360 joules
Synchronized Mode: Synchronized defibrillator pulse to patient's R-wave. "SYNC" message displayed on monitor
Share
Display
Screen Type: High- resolution display
Screen Size: 7 inches (17.7cm ) diagonally
Sweep Speed: 25mm\sec
Information: Heart Rare, Lead\Pads, Alarm On/Off, spO2, AED Function and Prompts, Alarm Selection and Limits, Delivered Energy
Defibrillator
Waveform : Biphasic
Energy Display: Monitor display indicates both selected and delivered energy
Charge Prompt Type: Voice and Visual prompts
Electrode Impedance Measurement Range: 0-250 ohms
ECG Monitoring
Patient Connection: 3- lead ECG cable, or 5-lead ECG cable, paddles
Lead Selection: Displayed on monitor, paddles, I,II,III, AVR, AVL,AVF, V
ECG Size: 0.25,0.5,1,1.5,2,4 cm/mV display on monitor.
Heart Rate: 20-300BPM
Heart Rate Alarm: Om\Off displayed on monitor, user-selectable
Smart Alarms: Beeper/voice prompts indicate shockable rhythm
Battery
Type: Rechargeable, Ni-MH battery, 12V
Operating Time: For a new, fully charged battery60 defibrillator discharges at maximum energy, or 3 hours minimum of continuous ECG monitoring. Additional parameters will effect operating time with different functions.
SpO2 Module
Measurement Range: 30~100%, ±2% between 80%~90%, other ±5%
Alarm Range: User set high limit and low limit
Alarm Accuracy: ±10% within setting values
Alarm time Accuracy: less than 12 sec
Recorder
Paper: 50mm thermal
Speed: 12.5mm/sec, 25mm/sec. User-Selectable 6-Second delay
Printing Method: High-resolution, thermal array print head
Print- out Modes: Manual or automatic, User-configurable
On/Off Control: Front panel and paddle
Automatic Function: 9-second recording initiated by alarm activation or defibrillator charge or defibrillator discharge
AED Mode
AED Function: Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts
Shockable Rhythms: Ventricular fibrillation
Ventricular tachycardia
QRS complex wave duration
Charge Control: Control on device front panel, press key on paddle
Manual Mode
Energy Selection: Selectable at 2,5,7,10,20,30,50,70,100,150,200,300,360 joules
Synchronized Mode: Synchronized defibrillator pulse to patient's R-wave. "SYNC" message displayed on monitor
Add a Review
You Might Also Like
Add Related products to weekly line up
In The Same Category
40 other products in the same category:
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New