EcoLA 3000 Infant Incubator
STABLE
AMBIENT TEMPERATURE MONITORING
With ambient temperature probe EcoLa series incubator is able to compare the gap between ambient and setting temperature and charging heating power output accordingly in order to provide more stable inside hood air temperature.
PID FUZZY ALGORITHM
With the help of latest PID technology, EcoLa minimizes the temperature variability to unprecedented 0.2°C and temperature overshoot is also reduced dramatically.
HEATING SYSTEM MONITORING
EcoLa monitors not only hood air temperature but also radiator and circuit air temperature. By collection each part's temperature information, EcoLa's temperature control system is mush more accurate and safe than others.
TEMPERATURE UNIFORMITY
EcoLa series incubator's air circuit system is designed based on massive experimentation. With plenty aerodynamics knowledge, the temperature uniformity is improved as much as possible in order to give infant the safest micro-environment.
RELIABLE
HEATING SOURCE DOUBLE PROTECTION
EcoLa is equipped with both thermocouple and mechanical temperature switch to protect the heating source of heating system and evaporator. Thermocouple reads real time temperature and limit the temperature in a safe range by feedback the temperature value to control module. While mechanical temperature switch is in serial circuits, if the heating source temperature goes unmoral level, temperature switch cuts off the circuit physically.
THREE CHANNEL TEMPERATURE SENSORS
There are three channel of temperature sensors in the module box. One channel is for reading hood temperature to remain the temperature at setting value. Another temperature sensor is in an individual circuit for protection only. The third sensor is used to compare the reading with other two sensor. If the reading of three sensors differ from 0.8°C, alarm is triggered.
SPECIFICATION
Give every newborn the best start in life
| Physical Attributes | Height | Width | Depth | Weigh |
| Hood Specification | Tubing access ports 10 --------------------------------- Soft bed mattress size 73.6 x 38.6 x 1.8 cm -------------------------------- Drawer size 28.0 x 2407cm 28.0 x aa.3cm (x2)
| Access door size 180x 13cm ------------------------- Mattress tilt ±12° -------------------------- | mattress to hood height 4.8cm --------------------------- Drawer depth 36cm ------------------------ |
| Temperature control Modes | Temperature control modes Skin and air temperature control mode ------------------------- Air mode control accuracy ≤±1.0°C --------------------------------------- Skin temperature accuracy ±0.3°C | Air mode control temperature range 20°C-37°C ---------------------- Skin mode control temperature range 34°C-37°C ---------------------------- Dual-skin temperature monitoring yes | Air mode control override temperature range 37°C-39° C --------------------- Air mode control override temperature range 37° C- 38°C ---------------------------- |
| Servo Humidity option | Humidity control range 30%-95% RG -------------------------------- Humidity display accuracy ±5% RH | Humidity control operating time without refilling 24Hours ---------------------------------- Humidity control accuracy ±5%RH | Humidity control reservoir capacity 1500ml ------------------------------ |
| Performance | Air flow velocity across mattress <10cm/sec -------------------------------------------- Temperature Overshoot <0.5°C maximum ------------------------------------------ Carbon Dioxide (CO2)Level <0.5% | Temperature rise time at 22°C (72°F) ambient <20min (frpm22°C, 50%RH, to 35°C) ----------------------------------------------------- Temperature uniformity with a level mattress 0.8°C
| Temperature variability <0.2°C --------------------------------------- Operating noise level in hood ≤45dBa ------------------------------ |
| Servo Oxygen Option | Oxygen display accuracy of full scale ±2% -------------------------------------- Oxygen control range 21% to 65% | Oxygen control accuracy(100% calibration) ±3% ---------------------------------------- Oxygen display resolution 1% | Oxygen control accuracy(21% calibration) ±5% ------------------------------------- |
| Scale Option | Weight range 300g to 8kg | Weight display resolution 1g | Weight accuracy ±10g |
| Operating Environment | Temperature 20° to 30°C | Humidity 10 to 95%RH | Air Velocity Up to 0.3m/sec |
| Storage/ Shipping Information | Temperature -25° to 60° C | Humidity 0 to 95% RH |
STABLE
AMBIENT TEMPERATURE MONITORING
With ambient temperature probe EcoLa series incubator is able to compare the gap between ambient and setting temperature and charging heating power output accordingly in order to provide more stable inside hood air temperature.
PID FUZZY ALGORITHM
With the help of latest PID technology, EcoLa minimizes the temperature variability to unprecedented 0.2°C and temperature overshoot is also reduced dramatically.
HEATING SYSTEM MONITORING
EcoLa monitors not only hood air temperature but also radiator and circuit air temperature. By collection each part's temperature information, EcoLa's temperature control system is mush more accurate and safe than others.
TEMPERATURE UNIFORMITY
EcoLa series incubator's air circuit system is designed based on massive experimentation. With plenty aerodynamics knowledge, the temperature uniformity is improved as much as possible in order to give infant the safest micro-environment.
RELIABLE
HEATING SOURCE DOUBLE PROTECTION
EcoLa is equipped with both thermocouple and mechanical temperature switch to protect the heating source of heating system and evaporator. Thermocouple reads real time temperature and limit the temperature in a safe range by feedback the temperature value to control module. While mechanical temperature switch is in serial circuits, if the heating source temperature goes unmoral level, temperature switch cuts off the circuit physically.
THREE CHANNEL TEMPERATURE SENSORS
There are three channel of temperature sensors in the module box. One channel is for reading hood temperature to remain the temperature at setting value. Another temperature sensor is in an individual circuit for protection only. The third sensor is used to compare the reading with other two sensor. If the reading of three sensors differ from 0.8°C, alarm is triggered.
SPECIFICATION
Give every newborn the best start in life
| Physical Attributes | Height | Width | Depth | Weigh |
| Hood Specification | Tubing access ports 10 --------------------------------- Soft bed mattress size 73.6 x 38.6 x 1.8 cm -------------------------------- Drawer size 28.0 x 2407cm 28.0 x aa.3cm (x2)
| Access door size 180x 13cm ------------------------- Mattress tilt ±12° -------------------------- | mattress to hood height 4.8cm --------------------------- Drawer depth 36cm ------------------------ |
| Temperature control Modes | Temperature control modes Skin and air temperature control mode ------------------------- Air mode control accuracy ≤±1.0°C --------------------------------------- Skin temperature accuracy ±0.3°C | Air mode control temperature range 20°C-37°C ---------------------- Skin mode control temperature range 34°C-37°C ---------------------------- Dual-skin temperature monitoring yes | Air mode control override temperature range 37°C-39° C --------------------- Air mode control override temperature range 37° C- 38°C ---------------------------- |
| Servo Humidity option | Humidity control range 30%-95% RG -------------------------------- Humidity display accuracy ±5% RH | Humidity control operating time without refilling 24Hours ---------------------------------- Humidity control accuracy ±5%RH | Humidity control reservoir capacity 1500ml ------------------------------ |
| Performance | Air flow velocity across mattress <10cm/sec -------------------------------------------- Temperature Overshoot <0.5°C maximum ------------------------------------------ Carbon Dioxide (CO2)Level <0.5% | Temperature rise time at 22°C (72°F) ambient <20min (frpm22°C, 50%RH, to 35°C) ----------------------------------------------------- Temperature uniformity with a level mattress 0.8°C
| Temperature variability <0.2°C --------------------------------------- Operating noise level in hood ≤45dBa ------------------------------ |
| Servo Oxygen Option | Oxygen display accuracy of full scale ±2% -------------------------------------- Oxygen control range 21% to 65% | Oxygen control accuracy(100% calibration) ±3% ---------------------------------------- Oxygen display resolution 1% | Oxygen control accuracy(21% calibration) ±5% ------------------------------------- |
| Scale Option | Weight range 300g to 8kg | Weight display resolution 1g | Weight accuracy ±10g |
| Operating Environment | Temperature 20° to 30°C | Humidity 10 to 95%RH | Air Velocity Up to 0.3m/sec |
| Storage/ Shipping Information | Temperature -25° to 60° C | Humidity 0 to 95% RH |
Add a Review
You Might Also Like
Add Related products to weekly line up
In The Same Category
40 other products in the same category:
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
