MTTS Wallaby Warmer
As they leave the warmth of the mother’s womb for the much cooler environment of the delivery room, babies with limited metabolic capacity due to illness, prematurity or low birthweight are susceptible to experiencing thermal instability . MTTS provides a technologically advanced Warmer to restore, stabilize, and control the temperature of the newborn baby.
Focusing on enhanced functionality and clinical performance, the Warmer features safe, automatic control of patient temperature with smart problem detection, safety fallback modes, and LCD displays that show set temperature, temperature alarm, treatment time, total usage time, and heater power level. Moreover, the easy-to-open sidewalls provide access to the patient while keeping them warm and create an ideal ergonomic setting where caregivers can work efficiently.
Quality
The Warmer is a reliable device that provides optimal thermal care with low power consumption, high reliability components and long-life heating element.
Innovation
The Warmer’s sophisticated technology is coupled with a user-friendly interface and an innovative problem detection system that work together to deliver consistent thermoregulation support.
Care
The Warmer supports premature and sick neonates with a unique thermal environment, while giving you ease of access so you can provide the best possible care.
Key Features
Overall
REMOTE TEMPERATURE and object sensing providing full patient protection from overheat if standard skin sensor is disconnected or faulty
Angle adjusted bed (up to 12 degrees)
Adjustable overhead unit and tray for X-ray procedures
Temperature Control System
Automatic (servo controlled)
Manual
Prewarm
Displays/Indicators
Bright LCD display to monitor patient temperature, treatment time, total usage time, heater power level and sensor connection
Integrated APGAR score timer
LCD display with diagnostic and troubleshooting information.
Total system time counter (lifetime)
Safety – Alarms
Heater element failure
Sensor failure
Power failure
Sensor off the patient
Accessories
IV Pole
Storage Shelf
Storage Drawer
Cylinders holder
Effective
For added patient safety, the Warmer incorporates a full complement of alarms that notify caregivers if the baby’s skin temperature deviates from the set point or the skin sensor falls of the patient.
Compatible
The intuitive control panel makes sophisticated functions easy-to-use. The large, bright digital display provides all essential information about the patient in an easy-to-read format.
Cost Efficient
The warmer provides quality care at exceptional value. It combines a feature-rich microenvironment with low initial cost, low power consumption and long-life components.
Technical Specifications
| Dimensions and Weight | Height | 185cm |
| Width | 64cm | |
| Weight | 64kg | |
| Shipping Weight | 78kg | |
| Performance Specifications | Application | Treatment of neonatal and pediatric patients to prevent hypothermia. |
| Patient Temperature Range | 34.0°C - 37.5°C | |
| Temperature measurement | 10.0°C - 50.0°C | |
| Sensor accuracy | +/- 0.1°C | |
| Standard Warranty | 1 year | |
| Heater Element | Type | Radiant |
| Power | 650W | |
| Procedure Lamp | Type | LED |
| Power | 3W | |
| Environmental Specifications | Operating Temperature | 18°C - 35°C |
| Power Supply | Voltage | 220-240V AC |
| Frequency | 47 - 63Hz |
| Ordering Information | Warmer Unit | WLB-1000 | Main Unit | |
| Mains Power Cable | EU Standard | COR-10001 | ||
| US/VN Standard | COR-10002 | |||
| UK Standard | COR-10003 | |||
| AUS Standard | COR-10004 | |||
| India Standard | COR-10005 | |||
| Accessories | Skin Sensor | WLB-1011 | ||
| Sticky tape for Skin Sensor | WLB-1013 | Box of 100 pieces | ||
| Bed Mattress | WLB-1020 | |||
| IV Pole | WLB-1030 | |||
| Storage Shelf | WLB-1040 | |||
| Storage Drawer | WLB-1050 | |||
| Cylinders Holder | WLB-1060 | |||
| Baby Bonnet | WLB-1070 | |||
| Documents Holder | WLB-1080 | |||
| User Manual | EN | WLB-1091 | English | |
| Assembly Instructions | EN | WLB-1092 | English | |
| Quick Reference Guide | EN | WLB-1093 | English | |
| Accessories Assembly Instructions | EN | WLB-1094 | English |
As they leave the warmth of the mother’s womb for the much cooler environment of the delivery room, babies with limited metabolic capacity due to illness, prematurity or low birthweight are susceptible to experiencing thermal instability . MTTS provides a technologically advanced Warmer to restore, stabilize, and control the temperature of the newborn baby.
Focusing on enhanced functionality and clinical performance, the Warmer features safe, automatic control of patient temperature with smart problem detection, safety fallback modes, and LCD displays that show set temperature, temperature alarm, treatment time, total usage time, and heater power level. Moreover, the easy-to-open sidewalls provide access to the patient while keeping them warm and create an ideal ergonomic setting where caregivers can work efficiently.
Quality
The Warmer is a reliable device that provides optimal thermal care with low power consumption, high reliability components and long-life heating element.
Innovation
The Warmer’s sophisticated technology is coupled with a user-friendly interface and an innovative problem detection system that work together to deliver consistent thermoregulation support.
Care
The Warmer supports premature and sick neonates with a unique thermal environment, while giving you ease of access so you can provide the best possible care.
Key Features
Overall
REMOTE TEMPERATURE and object sensing providing full patient protection from overheat if standard skin sensor is disconnected or faulty
Angle adjusted bed (up to 12 degrees)
Adjustable overhead unit and tray for X-ray procedures
Temperature Control System
Automatic (servo controlled)
Manual
Prewarm
Displays/Indicators
Bright LCD display to monitor patient temperature, treatment time, total usage time, heater power level and sensor connection
Integrated APGAR score timer
LCD display with diagnostic and troubleshooting information.
Total system time counter (lifetime)
Safety – Alarms
Heater element failure
Sensor failure
Power failure
Sensor off the patient
Accessories
IV Pole
Storage Shelf
Storage Drawer
Cylinders holder
Effective
For added patient safety, the Warmer incorporates a full complement of alarms that notify caregivers if the baby’s skin temperature deviates from the set point or the skin sensor falls of the patient.
Compatible
The intuitive control panel makes sophisticated functions easy-to-use. The large, bright digital display provides all essential information about the patient in an easy-to-read format.
Cost Efficient
The warmer provides quality care at exceptional value. It combines a feature-rich microenvironment with low initial cost, low power consumption and long-life components.
Technical Specifications
| Dimensions and Weight | Height | 185cm |
| Width | 64cm | |
| Weight | 64kg | |
| Shipping Weight | 78kg | |
| Performance Specifications | Application | Treatment of neonatal and pediatric patients to prevent hypothermia. |
| Patient Temperature Range | 34.0°C - 37.5°C | |
| Temperature measurement | 10.0°C - 50.0°C | |
| Sensor accuracy | +/- 0.1°C | |
| Standard Warranty | 1 year | |
| Heater Element | Type | Radiant |
| Power | 650W | |
| Procedure Lamp | Type | LED |
| Power | 3W | |
| Environmental Specifications | Operating Temperature | 18°C - 35°C |
| Power Supply | Voltage | 220-240V AC |
| Frequency | 47 - 63Hz |
Ordering Information and Servicing
| Ordering Information | Warmer Unit | WLB-1000 | Main Unit | |
| Mains Power Cable | EU Standard | COR-10001 | ||
| US/VN Standard | COR-10002 | |||
| UK Standard | COR-10003 | |||
| AUS Standard | COR-10004 | |||
| India Standard | COR-10005 | |||
| Accessories | Skin Sensor | WLB-1011 | ||
| Sticky tape for Skin Sensor | WLB-1013 | Box of 100 pieces | ||
| Bed Mattress | WLB-1020 | |||
| IV Pole | WLB-1030 | |||
| Storage Shelf | WLB-1040 | |||
| Storage Drawer | WLB-1050 | |||
| Cylinders Holder | WLB-1060 | |||
| Baby Bonnet | WLB-1070 | |||
| Documents Holder | WLB-1080 | |||
| User Manual | EN | WLB-1091 | English | |
| Assembly Instructions | EN | WLB-1092 | English | |
| Quick Reference Guide | EN | WLB-1093 | English | |
| Accessories Assembly Instructions | EN | WLB-1094 | English |
Add a Review
You Might Also Like
Add Related products to weekly line up
In The Same Category
39 other products in the same category:
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
- New
